iFlight Chimera7 FPV Racing Drone

$319.99
iFlight Chimera7 FPV Racing Drone
iFlight Chimera7 FPV Racing Drone
$319.99

Only US$319.99, buy best iflight chimera7 lr analog 320mm succex-d f7 v2.1 5-6s 7 inch long range freestyle fpv racing drone bnf w/ 5.8g 800mw vtx caddx ratel 1200tvl camera sale online store at wholesale price.

SaveSavedRemoved 0

iFlight Chimera7 FPV Racing Drone
Features:
– 6mm rigid arm design for more stiffness
– Top- and bottom battery mount option
– XING 2806.5 efficient wide stator motors
– GPS pre-installed for more safety at distance
– 800mW high power adjustable VTX
– TPU bottom stand for Gopro Mount is included. ( TPU Camera Mount is NOT Included)
– 360° TPU protection, FPV cam protection and antenna mounts
– Battery voltage LED status light (illuminated IF logo on the bottom)

Specification:
Brand Name: iFlight
Model: Chimera7 LR Analog
Item Name: 320mm F7 4s / 6S 7 Inch Long Range FPV Racing Drone
Drone Wheelbase: 320mm
Optional KV Version: 1300KV ( for Long Range); 1800KV ( for Freestyle)
Optional Receiver Version: PNP ( without Receiver)
TBS Crossfire Nano RX ( Built-in DJI Receiver & External TBS Crossfire Nano Receiver)
Weight: 580.2g ( without Battery)
Chimera7 320mm Frame Kit
Wheelbase: 320mm
Main body dimension: 285*199mm
Bottom to top distance: 20mm
Arm thickness: 6mm
Bottom plate thickness: 3mm
Top plate thickness: 2mm
Upper(middle) plate thickness: 3mm
Camera plate thickness: 3mm (included TPU inserts)
SucceX-D F7 V2.1 TwinG Flight Controller
MCU: 216MHz STM32F722
Gyroscope: 2x ICM20689
Barometer: YES
Blackbox: 32MB
Betaflight OSD: YES
BEC: 5V 2.5A / 9V 2.5A
Current sensor scale: 100
Inverter for SBUS input (UART2-RX)
Smartaudio & Tramp VTX protocol supported
Beeper pad: Yes
RSSI input pad: No
UARTs: 5
Motor outputs: 8
8 pin 4in1 ESC port (GND, VBAT, M1, M2, M3, M4, CUR, R5)
6 pin DJI Air Unit port (R1, GND, R2, T2, GND, 9V)
BLHeli32 Telemetry:RX5
Input voltage: recommended 2-6S, MAX 8S
Firmware Target: IFLIGHT_F722_TWING
Mounting pattern: 30.5*30.5mm φ4mm with Grommets φ3mm
Dimensions: 36x36mm
Weight: 7.5g
USB type-C
SucceX 50A BLHeli_32 4in1 ESC
MCU: STM32F051
Up tp 48kHz PWM frequency
Capacitance: 470uF/50V
Current Sensor: Yes
Input: 2-6S LIPO
Constant: 50A / Burst: 60A
BlHeli32 telemetry: Yes
BEC: No
Supports up to Dshot1200, Proshot, Oneshot, Multishot
Target: iFlight-BL32-4IN1
Weight: 14.4g
Size: 43x39mm (including the power pads)
Mounting Hole: 30.5×30.5mm/Φ3mm
XING 2806.5 1300KV / 1800KV Motor
Voltage: 2-6S
KV: 1300KV / 1800KV ( Optional)
Configuration: 12N14P
Bearing: NMB 11*5*5
Stator Diameter: 28
Stator Length: 6.5mm
Shaft Diameter: M5
No.of Cells(Lipo): 2-6S
Weight: 49.5g(with a short cable)
Motor mount hole: 19×19 φ3mm
Gemfan 7040 3-Blade Propeller
Quantity: 2 CW & 2 CCW
Color may vary
SucceX Force 5.8G 800mW VTX
Item: SucceX-Force 800mW adjustable VTX
Input Voltage: 7-36V
Output Voltage/ Max current: 5V 1A
12V Input Current: 40mA@PIT MODE, 95mA@25mW, 185mA@100mW,250mA@400mW, 380mA@800mW
Channel: 40CH
Size: 36x36x3mm
– PIT/25mW/100mW/400mW/800mW
Caddx Ratel 1200TVL FPV Camera Brand Name: Caddx
Item Name: Ratel
Lens: 2.1mm
Image Sensor: 1/1.8″ Inch starlight HDR sensor
Horizontal Resolution: 1200TVL
FOV: 180 Degree
Min. Latency: 8ms
TV System: NTSC & PAL (changeable)
WDR: Super WDR (HDR)
Dimensions: 19x19x19mm
Wide Power Input: DC 5-40V
Weight: 8g (N.W.)/ 40.5g (G.W.)
Optional Receiver Version
PNP Without Receiver Version: NOT Included receiver

TBS Crossfire Nano RX Version: include a TBS Crossfire Nano RX
Lipo Battery ( NOT Included)
For 1300KV Version: Recommend 6S 4000-4500mAh Lipo Battery
For 1800KV Version: Recommend 6S 2600-3000mAh Lipo Battery

RCDroneSky
Register New Account
Reset Password
Compare items
  • Total (0)
Compare
0