Charsoon Antimatter 250W 10A AC/DC Balance Charger Discharger For LiPo/NiCd/PB Battery
Charsoon Antimatter 250W 10A Balance Charger Features
- Perfect Protection Function
The charger has protection for reversed polarity(input or output),low input voltage,battery temperature,charging capacity and time overrun.
- Original Imported Components
This charger use original USA international rectifier and Japan rubycon,more reliable quality.
- Support Many Kinds of Battery
The charger can be used with Lipo,Lilo,LiFe,Ni-Cd,NiMH and Pb battery.
- High Power,High Current,High-Performance Power Conversion Circuit
This charger uses advance Synchronous buck-boost DC/DC converter technology with an output conversion efficiency that can reach over 90%. This is not only save power and reduce heat build up but also makes the charger more compact and conveniently mobile.
- Various Charging/Discharging Settings and Cycles
For lithium batteries: balance charging,normal charging,fast charging,storage,discharging,ext-discharging,charge/discharge cycling an battery monitoring.
For NiCd/NiMH batteries: charging-auto,charging-manual,discharging,charge/discharge cycling and forming charge.
For Pb batteries: charging and discharging.
- Data Storage
Convenient set of 10 battery profile memories that can be saved and loaded by number.
Unique Lithium Battery Expanding Discharging Program
When you connect the external capacity resistance,you can use it as the maximum discharge power capacity – 170W(25V/7A).
- Foam-cut Drive
In this mode,the charge acts as a convenient power supply for a hot wire foam cutter.
- Unique Lithium Battery Monitor Program
When you use other equipment to charge or discharge a Lithium pack,you can use the charger to monitor the per-cell voltages,battery temperature and process time. If any individual cell appears over-charged or over-discharged or the pack is too hot or the process has gone on for too long,the charge will generate an alarm sound and the related information will blink.
- Battery Interior Resistance Measurement
The charger can not only measure the internal resistance of the battery pack,and also can measure the per-cell internal resistance (only available for lithium battery).
Charsoon Antimatter 250W 10A Balance Charger Specs
- Input Voltage: AC: 100-240V DC: 10-18V
- Discharge Current: 0.05 ~ 7A
- Charge Current: 0.05 ~ 10A
- Maximum Discharge Capacity: 20W
- Maximum Charge Capacity: 250W
- Current Drain For Balancing LiPoly: 300mAh/cell
- Maximum Extern Discharge Power Capacity: 170W@25V/7A
- Pb Battery Voltage: 2 ~ 24V
- Battery Setup Memory: 10
- NiCd/NiMH Cell Count: 1 ~ 17 series
- Lithium (Li-poly/LiIo/LiFe) Cell Count: 1 ~ 6 series
- Dimensions: 137 x 82 x 26mm
- Free Shipping?Shipping cost only US$0
Last Updated Charsoon Antimatter 250W 10A price:$54.99
Other hot selling Balance Chargers: Go to see it!