Categories
RC Airplanes RC Helicopters

Align T REX T15 6CH 3D Flying RC Helicopter

Introduction:

Align’s smallest and most petite 3D helicopter T-REX T15, carries the same superior pedigree and design concept that originated from the successful T-REX line of helicopters. Featuring strong power, superior flight control stability, and equipped with high end components, far exceeding any other helicopters currently on the market.

Description:

Standard Equipment

Kit: T15 Combo

Main Blades: Align T15 120mm Main Blades x 2 Sets

Tail Blades: Align 51mm Diameter Tail Blades x 2

Battery: Align 7.4V 380mAh 50C

DSMX Satellite Extension: 3 Pin White Plug

1.3mm Hexagon Screw Driver: Align Blue Hex Driver x 2 (8.2g)

0.9mm Hexagon Screw Driver: Align Red Hex Driver (8g)

Spare Parts Box: Small Parts

Carry Case: T15 Carry Box – Black or Yellow (292x160x69mm)

Electronics Included

ESC: Align Dual ESC System Output

ESC Programing: Align T15G APP for iOS & Android

Motor: Align 15M Main Motor (1500KV/2405)

Motor Tail: Align 15MT Tail Motor (8000KV/1103)

Cyclic Servo: Align T15 x 2 – Align T15T x 1

Servo Gears: Plastic

Servo Case: Plastic

Flybarless System: Align T15G Flight Control System

Flybarless Programming: Align T15G APP for iOS & Android

Stabilization Level Mode: Auto-Level

Rescue Mode: Yes

Receiver Built In: Futaba S-FHSS

Receiver Supported: DSMX (Recommend Kensun) – DSM2/DMSS

Specification

Assembly Required: None – Bind and Fly

Length: 272mm – 10.71in

Height: 85mm – 3.35in

Main Blade Length: 120mm – 4.72in

Main Rotor Diameter: 280mm – 11.02in

Tail Rotor Diameter: 51mm – 2.01in

Main Drive Gear: Motor Direct Drive

Tail Drive System: Motor Direct Drive

Weight (Without Battery): 100g – 3.53oz

Package Included:

Standard equipment

1set x T15 Main Blades
1x 15M Main Motor(1500KV/2405)
1x 15MT Tail Motor(8000KV/1103)
2x T15 Digital Servo
1x T15T Digital Servo
1set x T15 Tail Blades
1x Remote Extension
1x Li-Po Battery 2S 360mAh 50C(45x20x13.5mm)
Accessories

1x T15 Kit
1set x T15 Main Blades
1set x T15 Tail Blades
1x 15M Main Motor(1500KV/2405)
1x 15MT Tail Motor(8000KV/1103)
2x T15 Digital Servo
1x T15T Digital Servo
1x Remote Extension
1x Li-Po Battery 2S 360mAh 50C(45x20x13.5mm)
1x T15 Carry Box
1x 1.3mm Hexagon screw driver(Blue/8.2g)
1x 0.9mm Hexagon screw driver(Red/8g)
1x Feathering Shaft Wrench
1x Parts box

Self-provided Equipment

●ALIGN T6 or Futaba S-FHSS 2.4G Transmitter. For the use of JR and Spektrum system, require JR DSM2/DMSS, Spektrum DSM2/DSMX 2.4GHz Transmitter and Satellite.
●Battery Charger.

BUY THE ITEM

dji-mini-3-pro
FLY WING FW200 1110 - Align T REX T15 6CH 3D Flying RC Helicopter